Fuel filters/fws
| Product number: | FS19895 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 110.5 mm |
Fleetguard fuel filter FS19895
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FS19895 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FS19895 fit it.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 130,5 mm. The filter has an outer diameter of 110,5 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS19895
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FS19895 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FS19895 fit it.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 130,5 mm. The filter has an outer diameter of 110,5 mm.Properties
| Product number: | FS19895 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 110.5 mm |