Fuel filters/fws
Product number: | FS1068 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 80.01 mm |
Fleetguard fuel filter FS1068
Impurities that are in the fuel are filtered out with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Ensure a regular replacement of the fuel filter FS1068 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FS1068 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
The height of the product is 152,298 mm. The filter has an outer diameter of 80,01 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS1068
Impurities that are in the fuel are filtered out with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Ensure a regular replacement of the fuel filter FS1068 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FS1068 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
The height of the product is 152,298 mm. The filter has an outer diameter of 80,01 mm.Properties
Product number: | FS1068 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 80.01 mm |