Fuel filters/fws
| Product number: | FF167 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Toro: | 76-5220 |
|---|---|
| Ransomes: | 178078 |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Product type: | Filters |
| Outside diameter: | 88 mm |
| Type filter: | Fuel filter |
Fleetguard fuel filter FF167
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Ensure a regular replacement of the fuel filter FF167 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF167 fit it.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Check the connection when replacing the fuel filter.
The height of the product is 72 mm. The filter has an outer diameter of 88 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF167
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Ensure a regular replacement of the fuel filter FF167 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF167 fit it.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Check the connection when replacing the fuel filter.
The height of the product is 72 mm. The filter has an outer diameter of 88 mm.Properties
| Product number: | FF167 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Toro: | 76-5220 |
|---|---|
| Ransomes: | 178078 |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Product type: | Filters |
| Outside diameter: | 88 mm |
| Type filter: | Fuel filter |