Tine for rotary harrows (DURAFACE) - right model fitting for Kuhn 52556400

52556400 rotary harrow tines for the kuhn machine

You can replace your 52556400 Tine for rotary harrows (DURAFACE) - right model fitting for Kuhn 52556400 with an alternative from RDM Parts 808-RH-68-R-DURA.

Mounting rotary harrow tines

Usually a part is fixed to a machine with a bolt. Besides that it is good to note that not every tine can be mounted universally. The tines rotate either left or right way round. In case of the 52556400 and our RDM Parts alternative 808-RH-68-R-DURA, the tine is mounted on the right side.

Specifications of the 52556400 and the 808-RH-68-R-DURA

The original part for Tine for rotary harrows (DURAFACE) - right model fitting for Kuhn 52556400 has a comparable length as our fitting original with number 808-RH-68-R-DURA. The length of the part is 320 millimeter and this makes it a fitting alternative for the original. The width of the 808-RH-68-R-DURA is equal to the original. The width measures 110 millimeter. The thickness of the Tine for rotary harrows (DURAFACE) - right model fitting for Kuhn 52556400 is important for the way the part fits on the machine. The Tine for rotary harrows (DURAFACE) - right model fitting for Kuhn 52556400 with part number 808-RH-68-R-DURA has a thickness of 16 millimeter. Since this is equal to the parts of RDM Parts, the 808-RH-68-R-DURA fits as an alternative for the original. The hole spacing measures the distance between the two mounting holes on the Tine for rotary harrows (DURAFACE) - right model fitting for Kuhn 52556400. With these holes the part can be attached to the machine. Watch closely if the spacing between the holes is comparable with the part that is to be replaced, else this won’t fit the machine. This Tine for rotary harrows (DURAFACE) - right model fitting for Kuhn 52556400 808-RH-68-R-DURA has a hole spacing of 68 millimeter. This 808-RH-68-R-DURA Tine for rotary harrows (DURAFACE) - right model fitting for Kuhn 52556400 has a mounting hole of 17 millimeter. With a bolt the part is attached through the mounting hole to the machine. Some parts have two or more mounting holes to fix it to the machine.

On what machines does the 808-RH-68-R-DURA fit?

Comparable to the original with number 52556400 the 808-RH-68-R-DURA fits for the machines of kuhn. Use the 808-RH-68-R-DURA as a fitting replacement for: Kuhn 52556400.

Do you have any questions about the 52556400 van kuhn

If you have any questions about the parts from RDM Parts, including the 808-RH-68-R-DURA or the original with number 52556400, then contact our product specialists. They will find a fitting answer to your question.