Tine for rotary harrows, right model fitting for Kuhn 525.394.00 - 525.604.00

525.394.00 - 525.604.00 rotary harrow tines for the kuhn machine

The 808-RH-68-R is a fitting alternative for the 525.394.00 - 525.604.00 van kuhn

Mounting rotary harrow tines.

Mounting rotary harrow tines

Usually a part is fixed to a machine with a bolt. It is good to know that not every tine is universally mountable on a machine. The tines have a rotation direction which is based on the placement of the blades edge. In case of the 525.394.00 - 525.604.00 and our fitting alternative this rotary harrow tine fits on the right side.

Specifications of the 525.394.00 - 525.604.00 and the 808-RH-68-R

The original part for Tine for rotary harrows, right model fitting for Kuhn 525.394.00 - 525.604.00 has a comparable length as our fitting original with number 808-RH-68-R. The Tine for rotary harrows, right model fitting for Kuhn 525.394.00 - 525.604.00 is 320 millimeter long. The original and the part from RDM Parts 808-RH-68-R are equal in width. This Tine for rotary harrows, right model fitting for Kuhn 525.394.00 - 525.604.00 is 110 millimeter in width. The thickness of the Tine for rotary harrows, right model fitting for Kuhn 525.394.00 - 525.604.00 is important for the way the part fits on the machine. The original Tine for rotary harrows, right model fitting for Kuhn 525.394.00 - 525.604.00 from kuhn is 16 millimeter thick. Since this is equal to the parts of RDM Parts, the 808-RH-68-R fits as an alternative for the original. The hole spacing of Tine for rotary harrows, right model fitting for Kuhn 525.394.00 - 525.604.00 is measured by the distance between the mounting holes. These mounting holes ensure a strong connection of the part to the kuhn machinery. To get it tightly fit, the distance between the holes on the new part and the old part should be equal. The hole spacing of the 808-RH-68-R from RDM Parts is equal to the original with number 525.394.00 - 525.604.00 and the distance measures 68 millimeter. This 808-RH-68-R Tine for rotary harrows, right model fitting for Kuhn 525.394.00 - 525.604.00 has a mounting hole of 17 millimeter. These holes are used to mount the Tine for rotary harrows, right model fitting for Kuhn 525.394.00 - 525.604.00 to the machine. Some of the parts have more than one mounting hole to mount it to the machine.

On what machines does the 808-RH-68-R fit?

Comparable to the original with number 525.394.00 - 525.604.00 the 808-RH-68-R fits for the machines of kuhn. The 808-RH-68-R is fitting for these parts: Pegoraro 7870, and Kuhn 525.394.00 - 525.604.00.

Do you have any questions about the 525.394.00 - 525.604.00 van kuhn

You can contact our product specialists with questions about the 808-RH-68-R or 525.394.00 - 525.604.00 They will find a fitting answer to your question.