RDM-Toro Hollow Tine hardened, Working-Ø 1/2
| Product number: | RDM-1914415 |
|---|---|
| Manufacturer | RDM Parts |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Mounting diameter: | 19.00 mm |
| Type: | Side eject tine |
| Working depth: | 80 mm |
| Working depth: | 12.7 mm |
rdm-toro hollow tine hardened, working-ø 1/2
The rdm-toro hollow tine hardened, working-ø 1/2 with part number RDM-1914415 is one of the parts in the growing assortment of RDM Parts. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. At RDM Parts we focus on service, you can always ask us a question about the part or about your machine.
rdm-toro hollow tine hardened, working-ø 1/2 for Toro
There are many differences between the parts of a machine, however close they may be in appearance. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. The manual consists of lists with parts that are in the machine and the positions of these parts are clarified with drawings. When doing a purchase, have a good look and compare the part number of the machine with our part number for similarities. If this is the case, the part will most likely fit for the machine. Having any doubts about the product, than ask for feedback from our product specialists.
rdm-toro hollow tine hardened, working-ø 1/2 is fitting for these part numbers
The rdm-toro hollow tine hardened, working-ø 1/2 with number RDM-1914415 can be used as a fitting replacement for several parts. The part numbers of these parts are: 89723 1914415.
€7.62*
- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
rdm-toro hollow tine hardened, working-ø 1/2
The rdm-toro hollow tine hardened, working-ø 1/2 with part number RDM-1914415 is one of the parts in the growing assortment of RDM Parts. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. At RDM Parts we focus on service, you can always ask us a question about the part or about your machine.
rdm-toro hollow tine hardened, working-ø 1/2 for Toro
There are many differences between the parts of a machine, however close they may be in appearance. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. The manual consists of lists with parts that are in the machine and the positions of these parts are clarified with drawings. When doing a purchase, have a good look and compare the part number of the machine with our part number for similarities. If this is the case, the part will most likely fit for the machine. Having any doubts about the product, than ask for feedback from our product specialists.
rdm-toro hollow tine hardened, working-ø 1/2 is fitting for these part numbers
The rdm-toro hollow tine hardened, working-ø 1/2 with number RDM-1914415 can be used as a fitting replacement for several parts. The part numbers of these parts are: 89723 1914415.
Properties
| Product number: | RDM-1914415 |
|---|---|
| Manufacturer | RDM Parts |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Mounting diameter: | 19.00 mm |
| Type: | Side eject tine |
| Working depth: | 80 mm |
| Working depth: | 12.7 mm |