Reel - 6 blade rh 86-on

This R503043 cutting cylinder fits the Jacobsen reel mowers and replaces the original with number 503043. Mowers with cutting cylinders are widely used for precise mowing work on sports or golf courses and for public green areas. This is because the cutting cylinders cut the grass very evenly and down to the millimeter.

A series of sharp blades is mounted on the cylinder and comes into contact with the bedknife. The R503043 has 6 blades mounted on the cylinder. The grass is caught between the blade edges on the cylinder and thus brought to the bedknife where the plant is cut off. A sharp blade ensures the grass is just cut. A dull blade tears the plant and thereby damages it; moreover, it causes an uneven cutting pattern.

R503043 Mower Reel Worn Out?

A worn mower reel? A cutting cylinder is not immediately worn out if it is dull. With the right tools, you can quickly sharpen the mower reel again. When the diameter of the reel becomes too small, the cutting pattern deteriorates or you can no longer properly adjust the reel and the bedknife.

Original Jacobsen 503043 Cutting Cylinders?

The original part, the Jacobsen 503043, can be replaced by our compatible RDM Parts R503043. RDM Parts components are attractive due to the good quality offered at a lower price than the original.

Order R503043 Mower Reel for Replacement

When replacing your mower reel, you should pay attention to the following points:

1. Do you have the correct part number? Check the parts manual of your machine to select the correct part number.
2. Do you not have a part number or are you unsure? Contact us, we are happy to help you.
3. When replacing a cutting cylinder, it is important that you also replace the bearings with the seals.