TINE - SIDE EJECT ALLOY 1/2 X 1/2 M
| Product number: | R201634 |
|---|---|
| Manufacturer | R&R Products |
Technical details
| Wall thickness: | 1.2 mm |
|---|---|
| Suitable for brand: | Jacobsen |
| Suitable for machine: | Jacobsen Aero King 30, Jacobsen GA-24, Ryan GA30, Ryan Greensaire II |
| Mounting diameter: | 0,5 inch |
| Type: | Alloy Machined Side-Eject |
tine - side eject alloy 1/2 x 1/2 m
The tine - side eject alloy 1/2 x 1/2 m with part number R201634 is one of the parts in the growing assortment of RDM Parts. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
tine - side eject alloy 1/2 x 1/2 m for Jacobsen
Machine parts that look very similar, can have big differences. A check in the machine manual or parts manual of Jacobsen is a good measure to make sure the parts fit for your machine. In this machine manual or parts manual are technical drawings of the machine with the related parts lists. Also doublecheck the part number on our website to see if it is closely matched to the part number of the machine. If this is similar it is very likely you have the right part. Having any doubts about the product, than ask for feedback from our product specialists.
tine - side eject alloy 1/2 x 1/2 m is fitting for these part numbers
The tine - side eject alloy 1/2 x 1/2 m with our part number R201634 is a fitting alternative voor one or more other (original and non original) parts. The part numbers of these parts are: 14082.p>.
€14.12*
- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
tine - side eject alloy 1/2 x 1/2 m
The tine - side eject alloy 1/2 x 1/2 m with part number R201634 is one of the parts in the growing assortment of RDM Parts. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
tine - side eject alloy 1/2 x 1/2 m for Jacobsen
Machine parts that look very similar, can have big differences. A check in the machine manual or parts manual of Jacobsen is a good measure to make sure the parts fit for your machine. In this machine manual or parts manual are technical drawings of the machine with the related parts lists. Also doublecheck the part number on our website to see if it is closely matched to the part number of the machine. If this is similar it is very likely you have the right part. Having any doubts about the product, than ask for feedback from our product specialists.
tine - side eject alloy 1/2 x 1/2 m is fitting for these part numbers
The tine - side eject alloy 1/2 x 1/2 m with our part number R201634 is a fitting alternative voor one or more other (original and non original) parts. The part numbers of these parts are: 14082.p>.
Properties
| Product number: | R201634 |
|---|---|
| Manufacturer | R&R Products |
Technical details
| Wall thickness: | 1.2 mm |
|---|---|
| Suitable for brand: | Jacobsen |
| Suitable for machine: | Jacobsen Aero King 30, Jacobsen GA-24, Ryan GA30, Ryan Greensaire II |
| Mounting diameter: | 0,5 inch |
| Type: | Alloy Machined Side-Eject |