TINE - HOLLOW ALLOY 1/2 X 3/4MT X 4
| Product number: | R201591 |
|---|---|
| Manufacturer | R&R Products |
Technical details
| Wall thickness: | 1.2 mm |
|---|---|
| Suitable for brand: | Toro |
| Suitable for machine: | Toro Greens Aerator, Toro ProCore 440, Toro ProCore 648, Toro ProCore 648s, Toro ProCore 660, Toro ProCore 864, Toro ProCore 880, Toro ProCore 1298 |
| Material Tickness: | 1.2 mm |
| Mounting diameter: | 0,75 inch |
| Outside diameter: | 13.5 mm |
| Type: | Alloy Hollow |
tine - hollow alloy 1/2 x 3/4mt x 4
The tine - hollow alloy 1/2 x 3/4mt x 4 with part number R201591 is one of the parts in the growing assortment of RDM Parts. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. We understand that more information is needed sometimes to get the right part, so we gladly help you with any questions about your part or machine.
tine - hollow alloy 1/2 x 3/4mt x 4 for Toro
Machine parts that look very similar, can have big differences. Check the parts manual or machine manual of your Toro machine to confirm if the parts fits for it. This manual schematically shows which part goes where on the machine, with a handy list of all parts that are in there. Before you buy a part, it is best to check if the part number is similar with the part number that we have given to our part. If this is similar it is very likely you have the right part. When in doubt about the fit of the part, our service team is ready to help you.
tine - hollow alloy 1/2 x 3/4mt x 4 is fitting for these part numbers
The tine - hollow alloy 1/2 x 3/4mt x 4 with number R201591 can be used as a fitting replacement for several parts. The part numbers of these parts are: 14064.
€10.15*
- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
tine - hollow alloy 1/2 x 3/4mt x 4
The tine - hollow alloy 1/2 x 3/4mt x 4 with part number R201591 is one of the parts in the growing assortment of RDM Parts. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. We understand that more information is needed sometimes to get the right part, so we gladly help you with any questions about your part or machine.
tine - hollow alloy 1/2 x 3/4mt x 4 for Toro
Machine parts that look very similar, can have big differences. Check the parts manual or machine manual of your Toro machine to confirm if the parts fits for it. This manual schematically shows which part goes where on the machine, with a handy list of all parts that are in there. Before you buy a part, it is best to check if the part number is similar with the part number that we have given to our part. If this is similar it is very likely you have the right part. When in doubt about the fit of the part, our service team is ready to help you.
tine - hollow alloy 1/2 x 3/4mt x 4 is fitting for these part numbers
The tine - hollow alloy 1/2 x 3/4mt x 4 with number R201591 can be used as a fitting replacement for several parts. The part numbers of these parts are: 14064.
Properties
| Product number: | R201591 |
|---|---|
| Manufacturer | R&R Products |
Technical details
| Wall thickness: | 1.2 mm |
|---|---|
| Suitable for brand: | Toro |
| Suitable for machine: | Toro Greens Aerator, Toro ProCore 440, Toro ProCore 648, Toro ProCore 648s, Toro ProCore 660, Toro ProCore 864, Toro ProCore 880, Toro ProCore 1298 |
| Material Tickness: | 1.2 mm |
| Mounting diameter: | 0,75 inch |
| Outside diameter: | 13.5 mm |
| Type: | Alloy Hollow |