Tine - hollow alloy 1/2 x 5/8MT x 4
| Product number: | R201581 |
|---|---|
| Manufacturer | R&R Products |
Replaces original
| R&R Products: | R112-1306 |
|---|
Technical details
| Wall thickness: | 1.2 mm |
|---|---|
| Suitable for brand: | Jacobsen |
| Suitable for machine: | Jacobsen GA-24, Ryan Greensaire II |
| Material Tickness: | 1.2 mm |
| Mounting diameter: | 0,625 inch |
| Outside diameter: | 13.2 mm |
| Type: | Alloy Hollow |
tine - hollow alloy 1/2 x 5/8mt x 4
The tine - hollow alloy 1/2 x 5/8mt x 4 with part number R201581 is one of the parts in the growing assortment of RDM Parts. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. We understand that more information is needed sometimes to get the right part, so we gladly help you with any questions about your part or machine.
tine - hollow alloy 1/2 x 5/8mt x 4 for Jacobsen
There are many differences between the parts of a machine, however close they may be in appearance. So that makes it important to check the parts manual to see if the part is fitting for your Jacobsen. In this machine manual or parts manual are technical drawings of the machine with the related parts lists. Also doublecheck the part number on our website to see if it is closely matched to the part number of the machine. If this is similar it is very likely you have the right part. When in doubt about the fit of the part, our service team is ready to help you.
tine - hollow alloy 1/2 x 5/8mt x 4 is fitting for these part numbers
The tine - hollow alloy 1/2 x 5/8mt x 4 with number R201581 can be used as a fitting replacement for several parts. The part numbers of these parts are: 14056 r112-1306 r201581u.p>.
€9.85*
- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
tine - hollow alloy 1/2 x 5/8mt x 4
The tine - hollow alloy 1/2 x 5/8mt x 4 with part number R201581 is one of the parts in the growing assortment of RDM Parts. You cannot only find original parts in our assortment, but also profitable alternative parts that fit in place of the original. We understand that more information is needed sometimes to get the right part, so we gladly help you with any questions about your part or machine.
tine - hollow alloy 1/2 x 5/8mt x 4 for Jacobsen
There are many differences between the parts of a machine, however close they may be in appearance. So that makes it important to check the parts manual to see if the part is fitting for your Jacobsen. In this machine manual or parts manual are technical drawings of the machine with the related parts lists. Also doublecheck the part number on our website to see if it is closely matched to the part number of the machine. If this is similar it is very likely you have the right part. When in doubt about the fit of the part, our service team is ready to help you.
tine - hollow alloy 1/2 x 5/8mt x 4 is fitting for these part numbers
The tine - hollow alloy 1/2 x 5/8mt x 4 with number R201581 can be used as a fitting replacement for several parts. The part numbers of these parts are: 14056 r112-1306 r201581u.p>.
Properties
| Product number: | R201581 |
|---|---|
| Manufacturer | R&R Products |
Replaces original
| R&R Products: | R112-1306 |
|---|
Technical details
| Wall thickness: | 1.2 mm |
|---|---|
| Suitable for brand: | Jacobsen |
| Suitable for machine: | Jacobsen GA-24, Ryan Greensaire II |
| Material Tickness: | 1.2 mm |
| Mounting diameter: | 0,625 inch |
| Outside diameter: | 13.2 mm |
| Type: | Alloy Hollow |