TINE - SE CARBIDE .350X 6.5X.072
| Product number: | R201515 |
|---|---|
| Manufacturer | R&R Products |
Replaces original
| Toro: | 108-9182 |
|---|
Technical details
| Wall thickness: | 1.8 mm |
|---|---|
| Suitable for brand: | Toro |
| Suitable for machine: | Toro ProCore 440, Toro ProCore 648, Toro ProCore 648s, Toro ProCore 660, Toro ProCore 864, Toro ProCore 880, Toro ProCore 1298 |
| Material Tickness: | 1.8 mm |
| Mounting diameter: | 0,75 inch |
| Outside diameter: | 13.3 mm |
| Type: | Alloy Hollow Side-Eject with Carbide Tip |
tine - se carbide .350x 6.5x.072
At RDM Parts we have a large assortment with machine parts for garden parc and golf machinery, which includes the tine - se carbide .350x 6.5x.072 with part number R201515. In this assortment you will find non-original parts and fitting alternatives. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
tine - se carbide .350x 6.5x.072 for Toro
No machine part is the same. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. This manual schematically shows which part goes where on the machine, with a handy list of all parts that are in there. Also doublecheck the part number on our website to see if it is closely matched to the part number of the machine. If this is the case, the part will most likely fit for the machine. If you have any questions at all about the product, ask our parts staff for advice.
tine - se carbide .350x 6.5x.072 is fitting for these part numbers
Our part with part number R201515 fits as an alternative for several original and non-original parts. The part numbers of these parts are: 41343 108-9182 toro.p>.
€26.34*
- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
tine - se carbide .350x 6.5x.072
At RDM Parts we have a large assortment with machine parts for garden parc and golf machinery, which includes the tine - se carbide .350x 6.5x.072 with part number R201515. In this assortment you will find non-original parts and fitting alternatives. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
tine - se carbide .350x 6.5x.072 for Toro
No machine part is the same. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. This manual schematically shows which part goes where on the machine, with a handy list of all parts that are in there. Also doublecheck the part number on our website to see if it is closely matched to the part number of the machine. If this is the case, the part will most likely fit for the machine. If you have any questions at all about the product, ask our parts staff for advice.
tine - se carbide .350x 6.5x.072 is fitting for these part numbers
Our part with part number R201515 fits as an alternative for several original and non-original parts. The part numbers of these parts are: 41343 108-9182 toro.p>.
Properties
| Product number: | R201515 |
|---|---|
| Manufacturer | R&R Products |
Replaces original
| Toro: | 108-9182 |
|---|
Technical details
| Wall thickness: | 1.8 mm |
|---|---|
| Suitable for brand: | Toro |
| Suitable for machine: | Toro ProCore 440, Toro ProCore 648, Toro ProCore 648s, Toro ProCore 660, Toro ProCore 864, Toro ProCore 880, Toro ProCore 1298 |
| Material Tickness: | 1.8 mm |
| Mounting diameter: | 0,75 inch |
| Outside diameter: | 13.3 mm |
| Type: | Alloy Hollow Side-Eject with Carbide Tip |