Reel - 8 blade fitting for Jacobsen -
| Product number: | R101267 |
|---|---|
| Manufacturer | R&R Products |
Technical details
| Product type: | Cutting cages |
|---|---|
| Number of reelblades: | 8 |
The original reels of your Jacobsen reelmower with number R101268 can be replaced with fitting RDM Parts with number R101267. This types of mowers are used for the most precise mowing jobs on the golfcourse, public green spaces or on sports tracks. The mowing result that is very neat because the grass can be cut to the millimetre precise.
Mowing reels have a set of blades on a cylinder. The R101267 had 8 blades mounted on the cylinder. The grass is caught between the blades on the cillinder and the sweeping motion cuts the grass on the bedknife. A requirement for this is that the knife edges on either side are very sharp. A dull blade tears the grass, damaging it in the process.
Reels R101267 worn down?
Do you perceive to have a worn down reel? Your reel is not worn down when the blades are dull. It can at all times be sharpened. When the diameter of the reel is to small for the cutting unit, the mowing result is and stays bad after cutting and can no longer be correctly adjusted, only then you have a worn down reel.
Original Jacobsen R101268?
This part R101267 replaces the original of Jacobsen with the original number of R101268. The advantage is that RDM Parts have an advantageous pricing when compared to the original.
Ordering reels R101267 for replacing
When replacing your reel you have to check some things:
- t
- Do you have the right parts number? Check the parts manual of your machine to select the right part number. t
- Do you miss the part number or are you in doubt? Contact us, , we like to help you. t
- When replacing the reel it is important to also replacing the reel it is important to also replace the bedknife and the bearings with the seal.
€628.38*
- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
The original reels of your Jacobsen reelmower with number R101268 can be replaced with fitting RDM Parts with number R101267. This types of mowers are used for the most precise mowing jobs on the golfcourse, public green spaces or on sports tracks. The mowing result that is very neat because the grass can be cut to the millimetre precise.
Mowing reels have a set of blades on a cylinder. The R101267 had 8 blades mounted on the cylinder. The grass is caught between the blades on the cillinder and the sweeping motion cuts the grass on the bedknife. A requirement for this is that the knife edges on either side are very sharp. A dull blade tears the grass, damaging it in the process.
Reels R101267 worn down?
Do you perceive to have a worn down reel? Your reel is not worn down when the blades are dull. It can at all times be sharpened. When the diameter of the reel is to small for the cutting unit, the mowing result is and stays bad after cutting and can no longer be correctly adjusted, only then you have a worn down reel.
Original Jacobsen R101268?
This part R101267 replaces the original of Jacobsen with the original number of R101268. The advantage is that RDM Parts have an advantageous pricing when compared to the original.
Ordering reels R101267 for replacing
When replacing your reel you have to check some things:
- t
- Do you have the right parts number? Check the parts manual of your machine to select the right part number. t
- Do you miss the part number or are you in doubt? Contact us, , we like to help you. t
- When replacing the reel it is important to also replacing the reel it is important to also replace the bedknife and the bearings with the seal.
Properties
| Product number: | R101267 |
|---|---|
| Manufacturer | R&R Products |
Technical details
| Product type: | Cutting cages |
|---|---|
| Number of reelblades: | 8 |