fuel filter FF5221
| Product number: | FF5221 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 71.5 mm |
Fleetguard fuel filter FF5221
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FF5221 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF5221 fits your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 71,5 mm.No longer available
€13.27*
Create label
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days (When in stock)
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "fuel filter FF5221"
Fleetguard fuel filter FF5221
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FF5221 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF5221 fits your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 71,5 mm.Properties
| Product number: | FF5221 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 71.5 mm |