fuel filter FF5093
| Product number: | FF5093 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Mitsubishi: | 3196204010 |
|---|
Technical details
| Product type: | Filters |
|---|---|
| Height: | 141.99 mm |
| Outside diameter: | 90.93 mm |
Fleetguard fuel filter FF5093
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FF5093 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF5093 fits your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. Check the parts manual for the place of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Make sure you connect the fuel filter in the right way.
The height of the product is 141,99 mm. The filter has an outer diameter of 90,93 mm.No longer available
€36.26*
Create label
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days (When in stock)
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "fuel filter FF5093"
Fleetguard fuel filter FF5093
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FF5093 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF5093 fits your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. Check the parts manual for the place of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Make sure you connect the fuel filter in the right way.
The height of the product is 141,99 mm. The filter has an outer diameter of 90,93 mm.Properties
| Product number: | FF5093 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Mitsubishi: | 3196204010 |
|---|
Technical details
| Product type: | Filters |
|---|---|
| Height: | 141.99 mm |
| Outside diameter: | 90.93 mm |