fuel filter FF270
| Product number: | FF270 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 71.88 mm |
| Outside diameter: | 93.98 mm |
Fleetguard fuel filter FF270
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Ensure a regular replacement of the fuel filter FF270 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF270 fits your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 71,88 mm. The filter has an outer diameter of 93,98 mm.No longer available
€30.27*
Create label
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days (When in stock)
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "fuel filter FF270"
Fleetguard fuel filter FF270
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Ensure a regular replacement of the fuel filter FF270 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF270 fits your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 71,88 mm. The filter has an outer diameter of 93,98 mm.Properties
| Product number: | FF270 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 71.88 mm |
| Outside diameter: | 93.98 mm |