fuel filter FF140
| Product number: | FF140 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 934.97 mm |
| Outside diameter: | 60.45 mm |
Fleetguard fuel filter FF140
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FF140 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF140 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual prescribes where the fuel filter is mounted on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 934,97 mm. The filter has an outer diameter of 60,45 mm.No longer available
€65.18*
Create label
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days (When in stock)
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "fuel filter FF140"
Fleetguard fuel filter FF140
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FF140 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF140 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual prescribes where the fuel filter is mounted on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 934,97 mm. The filter has an outer diameter of 60,45 mm.Properties
| Product number: | FF140 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 934.97 mm |
| Outside diameter: | 60.45 mm |