Fuel filters/fws
| Product number: | FF137 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Case: | 62946DA |
|---|
Technical details
| Product type: | Filters |
|---|---|
| Height: | 173.99 mm |
| Outside diameter: | 62.23 mm |
Fleetguard fuel filter FF137
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FF137 of Fleetguard. Before replacement, check the parts manual to make sure the FF137 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 173,99 mm. The filter has an outer diameter of 62,23 mm.No longer available
€40.85*
Create label
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days (When in stock)
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Fuel filters/fws"
Fleetguard fuel filter FF137
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FF137 of Fleetguard. Before replacement, check the parts manual to make sure the FF137 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 173,99 mm. The filter has an outer diameter of 62,23 mm.Properties
| Product number: | FF137 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Case: | 62946DA |
|---|
Technical details
| Product type: | Filters |
|---|---|
| Height: | 173.99 mm |
| Outside diameter: | 62.23 mm |