Blade, right model fitting for Palladino 560104
| Product number: | 808-PAL-01R |
|---|---|
| Manufacturer | RDM Parts |
Replaces original
| Noremat: | 100111 |
|---|---|
| Palladino: | 560104 |
Technical details
| Product type: | Milling Knife |
|---|---|
| Wideness: | 70 mm |
| Length: | 158 mm |
| Material Thickness: | 6 mm |
| Bolt hole diameter: | 12.5 mm |
| Boring: | 12.5 mm |
| Hole spacing: | 41 mm |
| Mounting: | Right |
| Thickness: | 6 mm |
| Working widt: | 112 mm |
560104 blades for the palladino machine
palladino tiller blades 560104 fit on the machines of the same brand. If you need an alternative, then you can use the 808-PAL-01R, which is a fitting solution for your tiller.
Mounting the blades
Tiller blades are fastened with a bolt. The rotating direction of the blade should be noticed when attaching them. The 808-PAL-01R is pretty much the same as the original and is placed on the right side. Because of the alternating way the blades are placed on the machine, the ploughing is optimised.
Specifications of the 560104 and the 808-PAL-01R
The original part for Blade, right model fitting for Palladino 560104 has a comparable length as our fitting original with number 808-PAL-01R. With its 158 millimeter it is a good alternative to the original. The width of the 808-PAL-01R is equal to the original. The parts is equal in width, 70 millimeter to be exact. The thickness of the Blade, right model fitting for Palladino 560104 is important for the way the part fits on the machine. 6 millimeter thick is the Blade, right model fitting for Palladino 560104 from palladino with the original part number 560104. So the part from RDM Parts with number 808-PAL-01R as an alternative for the machine.
The distance between the two mounting holes is also called the hole spacing. With these holes the part can be attached to the machine. Watch closely if the spacing between the holes is comparable with the part that is to be replaced, else this won’t fit the machine. This Blade, right model fitting for Palladino 560104 808-PAL-01R has a hole spacing of 41 millimeter. The mounting holes of the 808-PAL-01R have a diameter of 12,5 millimeter. These holes are used to mount the Blade, right model fitting for Palladino 560104 to the machine. Some of the parts have more than one mounting hole to mount it to the machine.On what machines does the 808-PAL-01R fit?
Comparable to the original with number 560104 the 808-PAL-01R fits for the machines of palladino. Use the 808-PAL-01R as a fitting replacement for: Noremat 100111, and Palladino 560104.
€11.22 * €11.22
€11.22 incl. VAT
€11.22*
Create label
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days (When in stock)
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Blade, right model fitting for Palladino 560104"
560104 blades for the palladino machine
palladino tiller blades 560104 fit on the machines of the same brand. If you need an alternative, then you can use the 808-PAL-01R, which is a fitting solution for your tiller.
Mounting the blades
Tiller blades are fastened with a bolt. The rotating direction of the blade should be noticed when attaching them. The 808-PAL-01R is pretty much the same as the original and is placed on the right side. Because of the alternating way the blades are placed on the machine, the ploughing is optimised.
Specifications of the 560104 and the 808-PAL-01R
The original part for Blade, right model fitting for Palladino 560104 has a comparable length as our fitting original with number 808-PAL-01R. With its 158 millimeter it is a good alternative to the original. The width of the 808-PAL-01R is equal to the original. The parts is equal in width, 70 millimeter to be exact. The thickness of the Blade, right model fitting for Palladino 560104 is important for the way the part fits on the machine. 6 millimeter thick is the Blade, right model fitting for Palladino 560104 from palladino with the original part number 560104. So the part from RDM Parts with number 808-PAL-01R as an alternative for the machine.
The distance between the two mounting holes is also called the hole spacing. With these holes the part can be attached to the machine. Watch closely if the spacing between the holes is comparable with the part that is to be replaced, else this won’t fit the machine. This Blade, right model fitting for Palladino 560104 808-PAL-01R has a hole spacing of 41 millimeter. The mounting holes of the 808-PAL-01R have a diameter of 12,5 millimeter. These holes are used to mount the Blade, right model fitting for Palladino 560104 to the machine. Some of the parts have more than one mounting hole to mount it to the machine.On what machines does the 808-PAL-01R fit?
Comparable to the original with number 560104 the 808-PAL-01R fits for the machines of palladino. Use the 808-PAL-01R as a fitting replacement for: Noremat 100111, and Palladino 560104.
Properties
| Product number: | 808-PAL-01R |
|---|---|
| Manufacturer | RDM Parts |
Replaces original
| Noremat: | 100111 |
|---|---|
| Palladino: | 560104 |
Technical details
| Product type: | Milling Knife |
|---|---|
| Wideness: | 70 mm |
| Length: | 158 mm |
| Material Thickness: | 6 mm |
| Bolt hole diameter: | 12.5 mm |
| Boring: | 12.5 mm |
| Hole spacing: | 41 mm |
| Mounting: | Right |
| Thickness: | 6 mm |
| Working widt: | 112 mm |
