Blade, left model fitting for Benassi RT45-401 - 6CM007

RT45-401 - 6CM007 blades for the benassi machine

benassi tiller blades RT45-401 - 6CM007 fit on the machines of the same brand. If you need an alternative, then you can use the 808-BEN-29L, which is a fitting solution for your tiller.

Mounting the blades

The RT45-401 - 6CM007 and our fitting alternative 808-BEN-29L are secured in place with a bolt. The rotating direction of the blade should be noticed when attaching them. The 808-BEN-29L is pretty much the same as the original and is placed on the left side. Blades are placed in this alternating manner to optimally plough through the soil.

Specifications of the RT45-401 - 6CM007 and the 808-BEN-29L

The Blade, left model fitting for Benassi RT45-401 - 6CM007 from benassi is just as long as the 808-BEN-29L from RDM Parts. The Blade, left model fitting for Benassi RT45-401 - 6CM007 is 164 millimeter long. The width of the 808-BEN-29L is equal to the original. The width measures 30 millimeter. In a general sense you can assume that a thicker product is better able to cope with wear and tear. The RT45-401 - 6CM007 from benassi has a thickness of 4 millimeter. So the part from RDM Parts with number 808-BEN-29L as an alternative for the machine. The hole spacing measures the distance between the two mounting holes on the Blade, left model fitting for Benassi RT45-401 - 6CM007. With these mounting holes the part can be attached to the machine from benassi. To get it tightly fit, the distance between the holes on the new part and the old part should be equal. The hole spacing of the 808-BEN-29L from RDM Parts is equal to the original with number RT45-401 - 6CM007 and the distance measures 68 millimeter. This 808-BEN-29L Blade, left model fitting for Benassi RT45-401 - 6CM007 has a mounting hole of 9 millimeter. These holes are used to mount the Blade, left model fitting for Benassi RT45-401 - 6CM007 to the machine. Some of the parts have more than one mounting hole to mount it to the machine.

On what machines does the 808-BEN-29L fit?

the 808-BEN-29L and RT45-401 - 6CM007 fit on benassi machinery. Use the 808-BEN-29L as a fitting replacement for: Hako 90-05836-3, and Benassi RT45-401 - 6CM007.