FM-Matras Tiller blade parts
- Article number: 808-gol-30r
- Article number: 808-fmo-04l
- Article number: 808-fmo-03r
- Article number: 808-fmo-03l
- Article number: 808-fmo-11l
- Article number: 808-gol-17l
- Article number: 808-fmo-11r
- Article number: 808-fmo-05r
- Article number: 808-gol-30l
- Article number: 808-fmo-05l
- Article number: 808-gol-17r
- Article number: 808-fmo-04r
Tiller blades and accessories for your FM-Matras machine
The wearing parts that fit your FM-Matras machinery are available at RDM Parts. If you replace the wearing parts of your machine in time, you are guaranteed of optimal performance. If your Tiller blades are dull, they will perform less and this will lead to more use of gas or defects to your machine. Find and replace worn parts in time by looking them up in the parts book of your FM-Matras machine
attach Tiller blades to your FM-Matras machinery
Alternating the tiller blades ensures that the distance between the blades is minimal. This makes half of the blades tillers left and the other half of the tiller blades right. The cuttings surface of the tiller blade is placed in a way that it can only be attached one way. If you replace the blades of your FM-Matras rotary tiller check if your replace a blade that turns left or right.
The shape of your FM-Matras tiller blades
For FM-Matras there are several shapes of tiller blades available. A tiller blade that has a C shape needs less power to process the soil than a tiller blade that is shaped like an L. This blade in C shape is mostly used at deeper tilling depts
The perpendicular tiller blades from FM-Matras, has more of an L shape, this blade is often used at tiller depths of less than 5 centimetres. This is caused by the form because it is less efficient. The specific design of the blades prevents compacting of the soil.
sizes of FM-Matras tiller blades
Finding the FM-Matras tiller blades for your machinery is easily done with our smart filters. Besides the left or right turning of the blade it is important to check if the distance between the connection holes and the width of the blade is exactly the same as your current tiller blades. The length that you need depends on the tilling dept.