Reel - 7 blade fitting for lh Jacobsen -

Reels slowly wear down over because of extensive use. This becomes clear when you see a less satisfying mowing result due to dull blades. After a few times on the sharpener, the reel can’t be sharpened anymore and is to be replaced with R101269 snijcilinder from RDM Parts. These parts can be used as a fitting replacement for Jacobsen machines with part number R101274.

Replacing your reels

Take a good look when you replace your parts, because one machine can use multiple reels. This is because in one mowing unit the grass is thrown out differently from another unit for a nice mowing result. If the reel from Jacobsen needs to be replaced, the reel should be put on the right height. RDM Parts has special tools that can be used to readjust your reels. You can always ask our product specialists for advice on reels or other parts from us.

OrderR101269 reels for Jacobsen

When replacing your reel you have to check some things:

1. Do you have the right parts number? Check the parts manual of your machine to select the right part number.
2. Do you miss the part number or are you in doubt? Contact us, , we like to help you.
3. When replacing the reel it is important to also replacing the reel it is important to also replace the bedknife and the bearings with the seal.