Blade, left model fitting for Zappator Z2-Z3

Z2-Z3 blades for the zappator machine

zappator tiller blades Z2-Z3 fit on the machines of the same brand. For these machines, RDM Parts has a fitting alternative in the 808-ZAP-06L blades.

Mounting the tiller blades

To mount the 808-ZAP-06L and the original Z2-Z3 you need to use assembly materials like a bolt. The rotating direction of the blade should be noticed when attaching them. The 808-ZAP-06L should therefore be placed on the left side to rotate correctly. Rotating clockwise and counter clockwise, the spinning blades ensure a good ploughing action.

Specifications of the Z2-Z3 and the 808-ZAP-06L

The original part for Blade, left model fitting for Zappator Z2-Z3 has a comparable length as our fitting original with number 808-ZAP-06L. With its 158 millimeter it is a good alternative to the original. The width of the 808-ZAP-06L is equal to the original. The width measures 40 millimeter. In a general sense you can assume that a thicker product is better able to cope with wear and tear. The Z2-Z3 from zappator has a thickness of 8 millimeter. The alternative that is offered by RDM Parts with number 808-ZAP-06L has an equal thickness and is thus a suitable alternative for the original. The distance between the two mounting holes is also called the hole spacing. With these mounting holes the part can be attached to the machine from zappator. Watch closely if the spacing between the holes is comparable with the part that is to be replaced, else this won’t fit the machine. The hole spacing of this Blade, left model fitting for Zappator Z2-Z3 808-ZAP-06L is 33 millimeter. This 808-ZAP-06L Blade, left model fitting for Zappator Z2-Z3 has a mounting hole of 10,5 millimeter. These holes are used to mount the Blade, left model fitting for Zappator Z2-Z3 to the machine. Some of the parts have more than one mounting hole to mount it to the machine.

On what machines does the 808-ZAP-06L fit?

Comparable to the original with number Z2-Z3 the 808-ZAP-06L fits for the machines of zappator. The 808-ZAP-06L is fitting for these parts: Noremat Schraube: 1.48.107 - Mutter: 1.22.615, and Zappator Z2-Z3.