Sweep

Sweep

Machine part 808-101.30.5111 is a Sweep from our big online parts assortment. We sell not only original parts, but also fitting alternatives. We understand that more information is needed sometimes to get the right part, so we gladly help you with any questions about your part or machine.

Specifications of the and the 808-101.30.5111

The thickness of the Sweep is important for the way the part fits on the machine. The original Sweep from is 6 millimeter thick. The alternative that is offered by RDM Parts with number 808-101.30.5111 has an equal thickness and is thus a suitable alternative for the original. How broad the working width is indicates the amount of surface that can be cultivated in one go, this is also referred to as working width. The 808-101.30.5111 has a working width of 210 millimeter. The radius of the flail, measured from the hearth of the hole on which the flail is mounted until the bottom, is 250 millimeter. This way it can be measured on what distance the flail should be operated. The distance between the two mounting holes is also called the hole spacing. With these mounting holes the part can be attached to the machine from Watch closely if the spacing between the holes is comparable with the part that is to be replaced, else this won’t fit the machine. This Sweep 808-101.30.5111 has a hole spacing of 45 millimeter.