Lube filters
| Product number: | LF16050 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Gasket inner diameter: | 57.4 mm |
| Gasket outer diameter: | 64.01 mm |
| Outside diameter: | 80.52 mm |
| Thread type: | M20 X 1.5-6H INT |
Fleetguard oil filter LF16050
Moving parts in the machine are lubricated with oil. The oil ensures the small particles that form by operation of the machine are absorbed to ensure everything moves normally. The oil filter LF16050 from Fleetguard takes these contamination from the oil. Look at the farts manual to see if the filter from Fleetguard with article number LF16050 fits on your machine. p>
Replace the Fleetguard oil filter
After every use the oil will leave a little bit of residue behind in the oil filter. After many hours of work, the oil filter will slowly start to get clogged signalling it is time for a new oil filter from Fleetguard. The oil filter is often in a place that is not accessible very conveniently when compared to an air filter. We advise a rubber strap, chain or wrench to make it easier to dismount the oil filter. At the same time as replacing the filter, remember to replace the oil so the system runs with a clean supply.
The height of the product is 81,03 mm. The filter has an outer diameter of 80,52 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard oil filter LF16050
Moving parts in the machine are lubricated with oil. The oil ensures the small particles that form by operation of the machine are absorbed to ensure everything moves normally. The oil filter LF16050 from Fleetguard takes these contamination from the oil. Look at the farts manual to see if the filter from Fleetguard with article number LF16050 fits on your machine. p>
Replace the Fleetguard oil filter
After every use the oil will leave a little bit of residue behind in the oil filter. After many hours of work, the oil filter will slowly start to get clogged signalling it is time for a new oil filter from Fleetguard. The oil filter is often in a place that is not accessible very conveniently when compared to an air filter. We advise a rubber strap, chain or wrench to make it easier to dismount the oil filter. At the same time as replacing the filter, remember to replace the oil so the system runs with a clean supply.
The height of the product is 81,03 mm. The filter has an outer diameter of 80,52 mm.Properties
| Product number: | LF16050 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Gasket inner diameter: | 57.4 mm |
| Gasket outer diameter: | 64.01 mm |
| Outside diameter: | 80.52 mm |
| Thread type: | M20 X 1.5-6H INT |