Hydraulic filters
Product number: | HF6535 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 62.53 mm |
Gasket outer diameter: | 71.98 mm |
Outside diameter: | 93.22 mm |
Thread type: | 3/4-14 BSP |
Fleetguard hydraulic filter HF6535
Hydraulic oil is the driving force behind the hydraulic system. A defect in this system is due to contaminated oil in 9 out of 10 cases. The particles that are caused by wear and tear are absorbed by the oil. A hydraulic filter such as Fleetguards HF6535 extracts the residue from the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Check the parts manual to make sure the filter with item number HF6535 is appropriate for the machine.
Replacement of the Fleetguard Hydraulic Filter HF6535
A hydraulic system remains optimally effective if the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. The location of the hydraulic filter depends on the type of machine and the location of the hydraulic system. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The height of the product is 146,56 mm. The filter has an outer diameter of 93,22 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF6535
Hydraulic oil is the driving force behind the hydraulic system. A defect in this system is due to contaminated oil in 9 out of 10 cases. The particles that are caused by wear and tear are absorbed by the oil. A hydraulic filter such as Fleetguards HF6535 extracts the residue from the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Check the parts manual to make sure the filter with item number HF6535 is appropriate for the machine.
Replacement of the Fleetguard Hydraulic Filter HF6535
A hydraulic system remains optimally effective if the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. The location of the hydraulic filter depends on the type of machine and the location of the hydraulic system. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The height of the product is 146,56 mm. The filter has an outer diameter of 93,22 mm.Properties
Product number: | HF6535 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 62.53 mm |
Gasket outer diameter: | 71.98 mm |
Outside diameter: | 93.22 mm |
Thread type: | 3/4-14 BSP |