Hydraulic filters
Product number: | HF6313 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Flow Direction: | Inside out |
Gasket inner diameter: | 13.94 mm |
Outside diameter: | 203 mm |
Fleetguard hydraulic filter HF6313
Hydraulic oil is the driving force behind the hydraulic system. In almost all cases, a defect in the system is initially caused by contaminated oil. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguard has a hydraulic filter with number HF6313 that takes the dirt out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Use the parts book to check if you can use the HF6313 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF6313
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 545 mm. The filter has an outer diameter of 203 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF6313
Hydraulic oil is the driving force behind the hydraulic system. In almost all cases, a defect in the system is initially caused by contaminated oil. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguard has a hydraulic filter with number HF6313 that takes the dirt out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Use the parts book to check if you can use the HF6313 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF6313
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 545 mm. The filter has an outer diameter of 203 mm.Properties
Product number: | HF6313 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Flow Direction: | Inside out |
Gasket inner diameter: | 13.94 mm |
Outside diameter: | 203 mm |