Hydraulic filters
| Product number: | HF30075 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 52.32 mm |
Fleetguard hydraulic filter HF30075
A hydraulic system of a machine works with oil. A defect in such a system starts in 90 % of cases because the oil is contaminated. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. A hydraulic filter such as Fleetguards HF30075 extracts the residue from the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Use the parts book to check if you can use the HF30075 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF30075
Make sure to replace the filter in a timely manner. A good hydraulic filter such as Fleetguards HF30075 is a worthy replacement for a worn filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 212,85 mm. The filter has an outer diameter of 52,32 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF30075
A hydraulic system of a machine works with oil. A defect in such a system starts in 90 % of cases because the oil is contaminated. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. A hydraulic filter such as Fleetguards HF30075 extracts the residue from the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Use the parts book to check if you can use the HF30075 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF30075
Make sure to replace the filter in a timely manner. A good hydraulic filter such as Fleetguards HF30075 is a worthy replacement for a worn filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 212,85 mm. The filter has an outer diameter of 52,32 mm.Properties
| Product number: | HF30075 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 52.32 mm |