Hydraulic filters
| Product number: | HF28934 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Gasket inner diameter: | 92.2 mm |
| Gasket outer diameter: | 100.2 mm |
| Outside diameter: | 108 mm |
| Thread type: | M40 X 2-6H INT |
Fleetguard hydraulic filter HF28934
A hydraulic system of a machine works with oil. In almost all cases, a defect in the system is initially caused by contaminated oil. The moving parts wear out slowly and the oil absorbs these wear particles. A hydraulic filter such as Fleetguards HF28934 extracts the residue from the oil. This is done by separating moisture and particles from the oil. Use the parts book to check if you can use the HF28934 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF28934
Make sure to replace the filter in a timely manner. A good hydraulic filter such as Fleetguards HF28934 is a worthy replacement for a worn filter. The location of the hydraulic system mainly determines where the hydraulic filter is placed on the machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 260,5 mm. The filter has an outer diameter of 108 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF28934
A hydraulic system of a machine works with oil. In almost all cases, a defect in the system is initially caused by contaminated oil. The moving parts wear out slowly and the oil absorbs these wear particles. A hydraulic filter such as Fleetguards HF28934 extracts the residue from the oil. This is done by separating moisture and particles from the oil. Use the parts book to check if you can use the HF28934 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF28934
Make sure to replace the filter in a timely manner. A good hydraulic filter such as Fleetguards HF28934 is a worthy replacement for a worn filter. The location of the hydraulic system mainly determines where the hydraulic filter is placed on the machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 260,5 mm. The filter has an outer diameter of 108 mm.Properties
| Product number: | HF28934 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Gasket inner diameter: | 92.2 mm |
| Gasket outer diameter: | 100.2 mm |
| Outside diameter: | 108 mm |
| Thread type: | M40 X 2-6H INT |