Fuel filters/fws
| Product number: | FS20103 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 77.5 mm |
Fleetguard fuel filter FS20103 FS20103
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These impurities are for example small particles that do not belong in the fuel and water. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter when the guidelines for the fuel filter FS20103of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FS20103 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. Check the parts manual for the place of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
The height of the product is 71 mm. The filter has an outer diameter of 77,5 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS20103 FS20103
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These impurities are for example small particles that do not belong in the fuel and water. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter when the guidelines for the fuel filter FS20103of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FS20103 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. Check the parts manual for the place of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
The height of the product is 71 mm. The filter has an outer diameter of 77,5 mm.Properties
| Product number: | FS20103 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 77.5 mm |