Fuel filters/fws
Product number: | FF5426 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Micron rating: | 20 micron |
Outside diameter: | 93.62 mm |
Thread type: | 1-14 UNS-2B |
Fleetguard fuel filter FF5426 FF5426
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These impurities are for example small particles that do not belong in the fuel and water. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FF5426of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FF5426 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Check the connection when replacing the fuel filter.
The height of the product is 154,94 mm. The filter has an outer diameter of 93,62 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF5426 FF5426
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These impurities are for example small particles that do not belong in the fuel and water. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FF5426of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FF5426 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Check the connection when replacing the fuel filter.
The height of the product is 154,94 mm. The filter has an outer diameter of 93,62 mm.Properties
Product number: | FF5426 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Micron rating: | 20 micron |
Outside diameter: | 93.62 mm |
Thread type: | 1-14 UNS-2B |