Fast delivery
Large assortment
Favorable price level

Fuel filters/fws

Product information "Fuel filters/fws"

Fleetguard fuel filter FF5300 FF5300

Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter when the guidelines for the fuel filter FF5300of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FF5300 part fits for your machine.

Replacing the Fleetguard fuel filter

The fuel runs through the fuel hose to the combustion chamber of the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. Check the parts manual for the place of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.

The height of the product is 103,5 mm. The filter has an outer diameter of 83,5 mm.

Show more Show less

Properties

Product number: FF5300
Manufacturer Fleetguard
Technical details
Suitable for brand: Toro
Product type: Filters
Outside diameter: 83.5 mm
Show more Show less