Tine for rotary harrows (DURAFACE) - left model fitting for Rabe 8411.62.04 - 8411.62.24

8411.62.04 - 8411.62.24 rotary harrow tines for the rabe machine

RDM Parts has a fitting alternative for the 8411.62.04 - 8411.62.24 from rabe in the shape of the 808-RH-45-L-DURA Tine for rotary harrows (DURAFACE) - left model fitting for Rabe 8411.62.04 - 8411.62.24.

Mounting rotary harrow tines

Usually a part is fixed to a machine with a bolt. Besides that it is good to note that not every tine can be mounted universally. The tines rotate either left or right way round. The 8411.62.04 - 8411.62.24 should be placed on the left side, just like our alternative 808-RH-45-L-DURA.

Specifications of the 8411.62.04 - 8411.62.24 and the 808-RH-45-L-DURA

The original part for Tine for rotary harrows (DURAFACE) - left model fitting for Rabe 8411.62.04 - 8411.62.24 has a comparable length as our fitting original with number 808-RH-45-L-DURA. With its 310 millimeter it is a good alternative to the original. The original and the part from RDM Parts 808-RH-45-L-DURA are equal in width. The width measures 100 millimeter. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb. The original Tine for rotary harrows (DURAFACE) - left model fitting for Rabe 8411.62.04 - 8411.62.24 from rabe is 15 millimeter thick. Since this is equal to the parts of RDM Parts, the 808-RH-45-L-DURA fits as an alternative for the original. The hole spacing of Tine for rotary harrows (DURAFACE) - left model fitting for Rabe 8411.62.04 - 8411.62.24 is measured by the distance between the mounting holes. These mounting holes ensure a strong connection of the part to the rabe machinery. To get it tightly fit, the distance between the holes on the new part and the old part should be equal. The hole spacing of the 808-RH-45-L-DURA from RDM Parts is equal to the original with number 8411.62.04 - 8411.62.24 and the distance measures 66 millimeter. The mounting holes of the 808-RH-45-L-DURA have a diameter of 17 millimeter. With a bolt the part is attached through the mounting hole to the machine. Some parts have two or more mounting holes to fix it to the machine.

On what machines does the 808-RH-45-L-DURA fit?

Like the original with number 8411.62.04 - 8411.62.24, the 808-RH-45-L-DURA Tine for rotary harrows (DURAFACE) - left model fitting for Rabe 8411.62.04 - 8411.62.24 fits on the machines of rabe. The 808-RH-45-L-DURA is fitting for these parts: Rabe 8411.62.04 - 8411.62.24.

Do you have any questions about the 8411.62.04 - 8411.62.24 van rabe

If there is anything unclear about the 8411.62.04 - 8411.62.24 or 808-RH-45-L-DURA, send your question to our product experts. They will find a fitting answer to your question.