Blade, left model fitting for MT 14 from Breviglieri - 808-GOL-17L

Product description

MT 14 blades for the Breviglieri machine

Breviglieri tiller blades MT 14 fit on the machines of the same brand. Also RDM Parts has spare parts available for these machines, like the part that is seen above GOL-17L, which is comparable with the original

Mounting the tiller blades

Tiller blades are fastened with a bolt. Tiller blades have a set direction to turn because of the placement of the blades edge. In case of the GOL-17L and the original counterpart, they are placed at the left side side. Rotating clockwise and counter clockwise, the spinning blades ensure a good ploughing action.

specifications of the MT 14 from Breviglieri?

For the Breviglieri RDM Parts also has the 808-GOL-17L Tiller blade with an equal length as the original with number: MT 14.With its 190 millimetre it is a good alternative to the original. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb.The Breviglieri Tiller blade with part number MT 14 has a thickness of 5 millimetre.The alternative that is offered by RDM Parts with number 808-GOL-17L has an equal thickness and is thus a suitable alternative for the original. The width of the 808-GOL-17L is equal to the original MT 14.The parts is equal in width, 45 millimetre to be exact. The distance between the two mounting holes is also called the hole spacing.With these mounting holes the part can be attached to the machine from Breviglieri.The distance has to correspond with the replacement part else it wont fit for the machine that it has to be mounted on.This Tiller blade 808-GOL-17L has a hole spacing of 33 millimetre. This 808-GOL-17L Tiller blade has a mounting hole of 10,5 millimetre.The mounting holes help to make a connection between the part and the machine.For some parts there are multiple mounting holes to mount the part.