Blade, right model fitting for 13014 from Bertolini - 808-BER-16R

Product description

13014 blades for the Bertolini machine

Bertolini tillers use 13014 tiller blades. If you need an alternative, then you can use the BER-16R, which is a fitting solution for your tiller.

Mounting the blades

Tiller blades are fastened with a bolt. The rotation direction is also of importance when the tiller blade is mounted. This part is placed on the right side side. Rotating clockwise and counter clockwise, the spinning blades ensure a good ploughing action.

specifications of the 13014 from Bertolini?

The length of the Bertolini 13014 Tiller blade is equal to the length of the equivalent of RDM Parts with number 808-BER-16R.The product is thus 155 millimetre long and is a fitting replacement for machines from Bertolini. In a general sense you can assume that a thicker product is better able to cope with wear and tear.The 13014 from Bertolini has a thickness of 6 millimetre.The alternative that is offered by RDM Parts with number 808-BER-16R has an equal thickness and is thus a suitable alternative for the original. The width of the 808-BER-16R is equal to the original 13014.The parts is equal in width, 50 millimetre to be exact. The hole spacing of Tiller blade is measured by the distance between the mounting holes.With these holes the part can be attached to the machine.Watch closely if the spacing between the holes is comparable with the part that is to be replaced, else this won’t fit the machine.The hole spacing of the 808-BER-16R from RDM Parts is equal to the original with number 13014 and the distance measures 28 millimetre This 808-BER-16R Tiller blade has a mounting hole of 10,5 millimetre.With a bolt the part is attached through the mounting hole to the machine.For some parts there are multiple mounting holes to mount the part.