Flail - right - new model fitting for 453 251 from Humus - 808-63-IND-91-R
Product description
453 251 flails for Humus machines
With a powerful sweep the flail cuts grass or other vegetation in pieces. RDM Parts has a flail that works in a similar way which also fits for the machines of Humus with the number: 63-IND-91-R.
Mounting 63-IND-91-R flails
The flails are hurled around by a rotating roll. The kind of flail is determinative for the way the roll is attached, this can be done with a bolt directly to the mounting point or with a set of shackles.
Specifications of the 453 251 and the 63-IND-91-R
The Humus Flail has a comparable length as our fitting original with number 808-63-IND-91-R.With its 330 millimetre it is a good alternative to the original. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb.The original Flail from Humus is 10 millimetre thick.The part can be replaced with the parts from RDM Parts because it has a comparable thickness. The width of the 808-63-IND-91-R is equal to the original 453 251.The parts is equal in width, 80 millimetre to be exact. The mounting holles of the 808-63-IND-91-R have a diameter of 24,3 milimetre.These holes are used to mount the Flail to the machine.For some parts there are multiple mounting holes to mount the part.
The broader the working width, the more efficient a product is in theory, because more surface can be cultivated in one go.For the 808-63-IND-91-R Flail the working width is millimetre.
Associated products
- Article number: 808-63-HUM-93
This part is also used in
Recently watched
- Article number: 2810354
- Article number: RDM-4324746
 (1)/59c1b501-4d5e-49df-957c-62cf3c9dbddf.JPG?size=small "V-snaarschijf - EPC031701")
- Article number: EPC031701
- Article number: R925080
Product description
453 251 flails for Humus machines
With a powerful sweep the flail cuts grass or other vegetation in pieces. RDM Parts has a flail that works in a similar way which also fits for the machines of Humus with the number: 63-IND-91-R.
Mounting 63-IND-91-R flails
The flails are hurled around by a rotating roll. The kind of flail is determinative for the way the roll is attached, this can be done with a bolt directly to the mounting point or with a set of shackles.
Specifications of the 453 251 and the 63-IND-91-R
The Humus Flail has a comparable length as our fitting original with number 808-63-IND-91-R.With its 330 millimetre it is a good alternative to the original. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb.The original Flail from Humus is 10 millimetre thick.The part can be replaced with the parts from RDM Parts because it has a comparable thickness. The width of the 808-63-IND-91-R is equal to the original 453 251.The parts is equal in width, 80 millimetre to be exact. The mounting holles of the 808-63-IND-91-R have a diameter of 24,3 milimetre.These holes are used to mount the Flail to the machine.For some parts there are multiple mounting holes to mount the part.
The broader the working width, the more efficient a product is in theory, because more surface can be cultivated in one go.For the 808-63-IND-91-R Flail the working width is millimetre.
Associated products
- Article number: 808-63-HUM-93
This part is also used in
Recently watched
- Article number: 2810354
- Article number: RDM-4324746
- Article number: EPC031701
- Article number: R925080
Article details
| Article number | 808-63-IND-91-R |
| Brand | RDM Parts |
Technical details
| Wideness | 80 |
| Tickness | 10 |
| Bolt hole diameter | 24,3 |
| Total length | 330 |
| Suitable for brand | Humus |
Product description
453 251 flails for Humus machines
With a powerful sweep the flail cuts grass or other vegetation in pieces. RDM Parts has a flail that works in a similar way which also fits for the machines of Humus with the number: 63-IND-91-R.
Mounting 63-IND-91-R flails
The flails are hurled around by a rotating roll. The kind of flail is determinative for the way the roll is attached, this can be done with a bolt directly to the mounting point or with a set of shackles.
Specifications of the 453 251 and the 63-IND-91-R
The Humus Flail has a comparable length as our fitting original with number 808-63-IND-91-R.With its 330 millimetre it is a good alternative to the original. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb.The original Flail from Humus is 10 millimetre thick.The part can be replaced with the parts from RDM Parts because it has a comparable thickness. The width of the 808-63-IND-91-R is equal to the original 453 251.The parts is equal in width, 80 millimetre to be exact. The mounting holles of the 808-63-IND-91-R have a diameter of 24,3 milimetre.These holes are used to mount the Flail to the machine.For some parts there are multiple mounting holes to mount the part.
The broader the working width, the more efficient a product is in theory, because more surface can be cultivated in one go.For the 808-63-IND-91-R Flail the working width is millimetre.
Associated products
- Article number: 808-63-HUM-93
This part is also used in
Recently watched
- Article number: 2810354
- Article number: RDM-4324746
- Article number: EPC031701
- Article number: R925080
Product description
453 251 flails for Humus machines
With a powerful sweep the flail cuts grass or other vegetation in pieces. RDM Parts has a flail that works in a similar way which also fits for the machines of Humus with the number: 63-IND-91-R.
Mounting 63-IND-91-R flails
The flails are hurled around by a rotating roll. The kind of flail is determinative for the way the roll is attached, this can be done with a bolt directly to the mounting point or with a set of shackles.
Specifications of the 453 251 and the 63-IND-91-R
The Humus Flail has a comparable length as our fitting original with number 808-63-IND-91-R.With its 330 millimetre it is a good alternative to the original. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb.The original Flail from Humus is 10 millimetre thick.The part can be replaced with the parts from RDM Parts because it has a comparable thickness. The width of the 808-63-IND-91-R is equal to the original 453 251.The parts is equal in width, 80 millimetre to be exact. The mounting holles of the 808-63-IND-91-R have a diameter of 24,3 milimetre.These holes are used to mount the Flail to the machine.For some parts there are multiple mounting holes to mount the part.
The broader the working width, the more efficient a product is in theory, because more surface can be cultivated in one go.For the 808-63-IND-91-R Flail the working width is millimetre.
Associated products
- Article number: 808-63-HUM-93
This part is also used in
Recently watched
- Article number: 2810354
- Article number: RDM-4324746
- Article number: EPC031701
- Article number: R925080
Need advice?
Open now!
Telephone: +31 (0)344-645675
Whatsapp: +31 (0)6 83443636
E-mail: info@rdmparts.com