Flail - left fitting for 302 951 from Humus - 808-63-IND-34-AL
Product description
302 951 flails for Humus machines
With a powerful sweep the flail cuts grass or other vegetation in pieces. If you want a fitting alternative solution then RDM Parts has this part: 302 951.
Mounting 63-IND-34-AL flails
A flail is mounted on a rotating roll. The kind of flail is determinative for the way the roll is attached, this can be done with a bolt directly to the mounting point or with a set of shackles.
Specifications of the 302 951 and the 63-IND-34-AL
The Humus Flail has a comparable length as our fitting original with number 808-63-IND-34-AL.The Flail is 420 millimetre long. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb.The 302 951 from Humus has a thickness of 10 millimetre.Since this is equal to the parts of RDM Parts, the 808-63-IND-34-AL fits as an alternative for the original The width of the 808-63-IND-34-AL is equal to the original 302 951.This Flail is 80 millimetre in width. The 808-63-IND-34-AL and the original with number 302 951 are mounted with a mounting hole of 24,3 millimetre.These holes are used to mount the Flail to the machine.Some of the parts have more than one mounting hole to mount it to the machine.
The broader the working width, the more efficient a product is in theory, because more surface can be cultivated in one go.For the 808-63-IND-34-AL Flail the working width is millimetre.
Associated products
- Article number: 808-63-HUM-93
This part is also used in
Recently watched
- Article number: 140517030
- Article number: R547601
 (1)/59c1b501-4d5e-49df-957c-62cf3c9dbddf.JPG?size=small "V-snaarschijf - EPC031701")
- Article number: EPC031701
- Article number: RDM-028828
Product description
302 951 flails for Humus machines
With a powerful sweep the flail cuts grass or other vegetation in pieces. If you want a fitting alternative solution then RDM Parts has this part: 302 951.
Mounting 63-IND-34-AL flails
A flail is mounted on a rotating roll. The kind of flail is determinative for the way the roll is attached, this can be done with a bolt directly to the mounting point or with a set of shackles.
Specifications of the 302 951 and the 63-IND-34-AL
The Humus Flail has a comparable length as our fitting original with number 808-63-IND-34-AL.The Flail is 420 millimetre long. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb.The 302 951 from Humus has a thickness of 10 millimetre.Since this is equal to the parts of RDM Parts, the 808-63-IND-34-AL fits as an alternative for the original The width of the 808-63-IND-34-AL is equal to the original 302 951.This Flail is 80 millimetre in width. The 808-63-IND-34-AL and the original with number 302 951 are mounted with a mounting hole of 24,3 millimetre.These holes are used to mount the Flail to the machine.Some of the parts have more than one mounting hole to mount it to the machine.
The broader the working width, the more efficient a product is in theory, because more surface can be cultivated in one go.For the 808-63-IND-34-AL Flail the working width is millimetre.
Associated products
- Article number: 808-63-HUM-93
This part is also used in
Recently watched
- Article number: 140517030
- Article number: R547601
- Article number: EPC031701
- Article number: RDM-028828
Article details
| Article number | 808-63-IND-34-AL |
| Brand | RDM Parts |
Technical details
| Bolt hole diameter | 24,3 |
| Suitable for brand | Humus |
| Total length | 420 |
| Tickness | 10 |
| Wideness | 80 |
Product description
302 951 flails for Humus machines
With a powerful sweep the flail cuts grass or other vegetation in pieces. If you want a fitting alternative solution then RDM Parts has this part: 302 951.
Mounting 63-IND-34-AL flails
A flail is mounted on a rotating roll. The kind of flail is determinative for the way the roll is attached, this can be done with a bolt directly to the mounting point or with a set of shackles.
Specifications of the 302 951 and the 63-IND-34-AL
The Humus Flail has a comparable length as our fitting original with number 808-63-IND-34-AL.The Flail is 420 millimetre long. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb.The 302 951 from Humus has a thickness of 10 millimetre.Since this is equal to the parts of RDM Parts, the 808-63-IND-34-AL fits as an alternative for the original The width of the 808-63-IND-34-AL is equal to the original 302 951.This Flail is 80 millimetre in width. The 808-63-IND-34-AL and the original with number 302 951 are mounted with a mounting hole of 24,3 millimetre.These holes are used to mount the Flail to the machine.Some of the parts have more than one mounting hole to mount it to the machine.
The broader the working width, the more efficient a product is in theory, because more surface can be cultivated in one go.For the 808-63-IND-34-AL Flail the working width is millimetre.
Associated products
- Article number: 808-63-HUM-93
This part is also used in
Recently watched
- Article number: 140517030
- Article number: R547601
- Article number: EPC031701
- Article number: RDM-028828
Product description
302 951 flails for Humus machines
With a powerful sweep the flail cuts grass or other vegetation in pieces. If you want a fitting alternative solution then RDM Parts has this part: 302 951.
Mounting 63-IND-34-AL flails
A flail is mounted on a rotating roll. The kind of flail is determinative for the way the roll is attached, this can be done with a bolt directly to the mounting point or with a set of shackles.
Specifications of the 302 951 and the 63-IND-34-AL
The Humus Flail has a comparable length as our fitting original with number 808-63-IND-34-AL.The Flail is 420 millimetre long. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb.The 302 951 from Humus has a thickness of 10 millimetre.Since this is equal to the parts of RDM Parts, the 808-63-IND-34-AL fits as an alternative for the original The width of the 808-63-IND-34-AL is equal to the original 302 951.This Flail is 80 millimetre in width. The 808-63-IND-34-AL and the original with number 302 951 are mounted with a mounting hole of 24,3 millimetre.These holes are used to mount the Flail to the machine.Some of the parts have more than one mounting hole to mount it to the machine.
The broader the working width, the more efficient a product is in theory, because more surface can be cultivated in one go.For the 808-63-IND-34-AL Flail the working width is millimetre.
Associated products
- Article number: 808-63-HUM-93
This part is also used in
Recently watched
- Article number: 140517030
- Article number: R547601
- Article number: EPC031701
- Article number: RDM-028828
Need advice?
Open now!
Telephone: +31 (0)344-645675
Whatsapp: +31 (0)6 83443636
E-mail: info@rdmparts.com