Flail - right - old model fitting for 302 351 from Humus - 808-63-IND-33-A-R
|Bolt hole diameter||24,3|
|Suitable for brand||Humus|
302 351 flails for Humus machines
The 302 351 and 63-IND-33-A-R flails mow by rotating with a big force. The 63-IND-33-A-R is our fitting alternative for the original from Humus.
Mounting 63-IND-33-A-R flails
A flail is mounted on a rotating roll. The kind of flail is determinative for the way the roll is attached, this can be done with a bolt directly to the mounting point or with a set of shackles.
Specifications of the 302 351 and the 63-IND-33-A-R
The length of the Humus 302 351 Flail is equal to the length of the equivalent of RDM Parts with number 808-63-IND-33-A-R.The length of the part is 310 millimetre and this makes it a fitting alternative for the original. The thicker a product is the more it can handle in terms of stress, can be taken as a general rule of thumb.The Humus Flail with part number 302 351 has a thickness of 10 millimetre.The part can be replaced with the parts from RDM Parts because it has a comparable thickness. Equal to the original parts, the part from RDM Parts fits as an alternative for the machine from Humus.The width measures 80 millimetre The mounting holles of the 808-63-IND-33-A-R have a diameter of 24,3 milimetre.These holes are used to mount the Flail to the machine.Some of the parts have more than one mounting hole to mount it to the machine.